Tiny Arcade Case

 I decided to make a bottom case for my Tiny Arcade board to protect from the sharp bits. 

I design in Fusion 360. I had already used Fusion 360 to create the PCB board outline so I used that as a starting point for the case. I created tabs on each end so the board just snaps in.

I have a Prusa Mk3 3D printer and it did a nice job on the print. I used a 0.010" offset from the board outline and it gave a really nice fit.

Here are the files for the case design. Use the Fusion 360 file if you want to edit the file. This is the .stl file if you just want to 3D print it.